Big scan of the development of the hottest inorgan

  • Detail

Large scan of inorganic coating development

large scan of inorganic coating development

July 25, 2014

[China coating information] inorganic coating is a kind of coating with inorganic materials as the main film-forming material. It is the abbreviation of all inorganic mineral coating, which is widely used in the fields of architecture, painting and other daily life

now inorganic paint is a kind of paint synthesized with new material formula, which has the advantage that traditional paint cannot replace. Because of the characteristics of its product ingredients, it can minimize the release of formaldehyde and other harmful substances. At the same time, it also has good moisture-proof and mold resistant functions. And inorganic coatings do not rely on basic materials such as petrochemical industry. Its resource application and low-carbon environmental protection have good advantages

relevant data show that in developed countries and regions such as Europe and the United States, inorganic coating products account for the mainstream market, with a market share of 93% and advanced manufacturing applications; In China, only companies in Fujian, Guangdong, Shanghai and other places are manufacturing inorganic coatings, and now the market share is less than 5%

the rapid development of modern world economy and world industrialization has led to the rapid deterioration of the earth's environment, and serious pollution threatens the living space of mankind. "Green" and "environmental protection" means that people attach great importance to strengthening the resistance of components to rugged environmental resistance; The lower modeling version of Onyx components can be used. The requirements put forward by environmental protection for the coating industry are also the development direction of coatings

for a long time, organic coatings have been widely used because of their good decoration, variety diversity and low price. However, as the main raw materials of organic architectural coatings come from coal, oil, natural gas and other natural resources 17 Mud Hydrometer resources will produce a large number of by-products, volatile solvents and residual monomers during processing, which not only cause environmental pollution, but also enable them to achieve excellent results in business, while wasting a lot of resources and energy. At the same time, the organic paint is painted on the wall surface and forms a film with the outer wall, while the pressure generated by air and moisture is affected by temperature and moves on the impermeable inner and outer wall surface, constantly acting on the film of the paint. After a period of time, the wall film will appear hollowing, foaming and even peeling off

compared with these defects of organic coatings, inorganic coatings have good air permeability, anti pollution and excellent comprehensive environmental protection performance. With the increasingly stringent requirements on the performance and environmental protection of architectural coatings, foreign developed countries attach great importance to the performance research, production and application of inorganic coatings, and have done a lot of work in these aspects. China started late in this regard, but the starting point is high

inorganic coating is a new generation of interior and exterior wall coating mainly based on cement-based inorganic water hardener and natural plant rubber powder in the latest international research field. At the same time, it adopts oxidation modified waterborne mineral coating, which is green and environmental friendly, and has broad-spectrum antibacterial property. It has a 2-minute inhibition rate of more than 99.98% against a variety of bacteria and molds

when applied on cement mortar, concrete and masonry surface, the coating is firmly combined with the wall through Petrochemical reaction, without obvious interface layer, which is fundamentally different from the film-forming principle of previous organic coatings. The experiment shows that the inorganic mineral internal and external wall coating test block does not change color after boiling in boiling water for 72 hours, and the coating does not blister, curl or fall off. This cement-based inorganic interior and exterior wall coating has the remarkable characteristics of non combustion supporting and acid and alkali resistance

now, as China is more and more in line with internationalization, it is conceivable that in the future building coating market, the concept of green, inorganic and environmental protection will be deeply rooted in the hearts of the people, and only truly green and environmental protection can be truly accepted by people

with the rapid development of China's construction industry, the development of decorative materials in the 21st century has involved diversification, fashion, personalization and, most importantly, health. From the perspective of domestic wall decoration materials, not only the price is high, but also there are great deficiencies in rational performance, such as seams, easy to crack, easy to pollute, easy to get damp, moldy and so on. In the face of the huge blank market lost by low-end products, and the special needs of people for personalized wall decoration style, especially for environmental protection and health. Inorganic oxidation modified mineral coatings should be born at the right time

according to state authority 5 The technology station for the preparation of new metal and metal matrix composite materials announced that in developed countries in Europe and the United States, inorganic coatings account for the mainstream market, accounting for 93% of the market share. The market share of inorganic coatings in the domestic market is 5%

although the development of inorganic coatings in China is relatively late, the starting point is high, so the home decoration coating industry is experiencing rare development opportunities. First of all, people pursue high-quality living environment, activating the application of various architectural coatings; Secondly, the development of architectural coatings has been fully supported by major policies, which has created good external conditions for the development of China's construction industry. The rise of inorganic coatings will bring innovative strength to the construction industry

Copyright © 2011 JIN SHI